ATL 5G R16 kit with 800MHz dual-core ARM CPU, 512MB RAM, 1 x Gigabit Ethernet port with 802.3af/at PoE-in for powering, 4.2 Gbps 5G + 2.0 Gbps LTE CAT20 modem for International 5G SA and NSA bands 1/3/5/7/8/20/28/38/40/41/75/76/77/78, LTE bands 1/3/5/7/8/20/28/32/38/40/41/42/43, 4x4 MIMO 16dBi integrated antennas, Micro SIM slot, eSIM + MikroTik connectivity, RouterOS L3, outdoor enclosure, PSU, PoE injector, pole mounting bracket
Installing an antenna on a rooftop and realizing you forgot a SIM card? Or trying to activate your eSIM, but got stuck in the mobile operator call-center queue, endlessly listening to some classical “Your call is important” melodies over the phone?
MikroTik Connectivity solves both issues! Log in to your MikroTik account, choose a data plan, and you’re online. This pre-activated, self-sufficient eSIM setup bridges the gap between “just installed” and “fully operational.” Ideal for remote locations, failover setups, or any place you need reliable internet right now — without any extra steps.
With a powerful 16 dBi directional antenna, 4x4 MIMO support, 512 MB of RAM, a modern dual-core ARM CPU, and a wide range of supported bands, ATL 5G is built to perform — whether you’re deep in the countryside or surrounded by signal noise in the city. And with Gigabit Ethernet and PoE-in support, installation is cleaner and simpler — just a single cable for both power and data.
ATL 5G features 4 high-gain middle-band antennas and 4 low-band antennas, including full Band 28 support for both LTE and 5G. That means exceptional coverage in all the frequencies that really matter, including from 700 MHz to 1 GHz — the sweet spot for rural reach and wall penetrating reliability.
These low-frequency bands are some of the most widely used by mobile operators around the world, and ATL 5G is ready to squeeze every last drop of performance from them — ensuring you stay connected where others struggle to get a bar.
And when you don’t want to rely on a traditional SIM card, you can use the MikroTik eSIM as your main data plan for low-usage setups or IoT deployments like KNOTs. Or simply switch profiles and connect to your favorite mobile operator — flexibility is built in
At first glance, ATL 5G looks like a spaceship — but there’s a good reason for that. This sleek form factor prevents snow and water from collecting and freezing up, making it ideal for installations in cold, wet, or windy environments. No need to climb back up and clean the antenna after every snowstorm.
The IP66-rated enclosure is fully sealed against dust and powerful water jets, so ATL 5G can handle some of the roughest weather conditions — whether it’s mounted on a snowy rooftop in the city or standing alone in the open countryside.
Product code | ATLGM&RG520F-EU |
---|---|
CPU | Dual-Core 88F3720 800 MHz |
CPU Architecture | ARM 64bit |
Size of RAM | 512 MB |
Storage | 32 MB Flash |
Number of 1G Ethernet ports | 1 |
Number of M.2 slots | 1 |
SIM slots | 1 Micro SIM, eSIM |
LTE modem | R11mL-RG520F |
TAC | 86945405 |
Antenna gain | 16 dBi |
MIMO DL | 4x4 |
5G SA Category | 4.2 Gbps Downlink, 900 Mbps Uplink |
5G SA FDD bands | 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800 MHz) / 28 (700 MHz) |
5G SA TDD bands | 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) / 75 (1500 MHz) / 76 (1500 MHz) / 77 (3700 MHz) / 78 (3500 MHz) |
5G NSA Category | 5.0 Gbps Downlink, 650 Mbps Uplink |
5G NSA FDD bands | 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800 MHz) / 28 (700 MHz) |
5G NSA TDD bands | 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) / 75 (1500 MHz) / 76 (1500 MHz) / 77 (3700 MHz) / 78 (3500 MHz) |
LTE Category | 20 (2.0 Gbps Downlink, 200 Mbps Uplink) |
LTE FDD bands | 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) / 28 (700MHz) / 32 (1500 MHz) |
LTE TDD bands | 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) / 42 (3500MHz) / 43 (3700MHz) |
3G Category | R8 (42.2Mbps Downlink, 5.76Mbps Uplink) |
3G bands | 1 (2100MHz) / 5 (850MHz) / 8 (900MHz) |
Dimensions | 311 x 311 x 179 mm |
Operating system | RouterOS v7, License level 3 |
Operating temperature | -40°C to +70°C |
DC input | PoE-In |
---|---|
Input Voltage | 12-56 V |
Power adapter nominal voltage | 24 V |
Power adapter nominal current | 0.8 A |
PoE-In | 802.3af/at |
Max power consumption (without attachments) | 10 W |
Max power consumption | 10 W |